久久久91-久久久91精品国产一区二区-久久久91精品国产一区二区三区-久久久999国产精品-久久久999久久久精品

作者：北京廣利核系統工程有限公司 李剛, 郝愛霞，王江，梁中起，王連春，李俊卿

摘要：核安全法規HAF003中明確指出關于核電廠安全級物項“必須對保證質量所必需的每一個工作步驟都進行檢查。如果不能對已加工的物項進行檢查或要求附加的工藝監視，大綱必須規定間接控制措施”，以保證核電廠安全級物項能夠長期安全、可靠、穩定運行。本文主要描述了多種檢驗方法在核電廠安全級DCS設備盤柜裝配檢查中的應用，通過對標準RCC-E“MC2000目視檢查和機械檢查”要求的詳細解讀和對安全級DCS設備盤柜工程設計應用特點分析，結合安全級DCS設備盤柜裝配操作工藝流程，明確提出了多種檢驗方法：涂抹標記法、指差呼稱法、扭矩校驗法、隔離驗證法和光源照射驗證法在安全級DCS設備盤柜裝配檢查中的應用過程。這些檢驗方法已在多個核電機組安全級DCS設備盤柜裝配檢查中得以應用，證明了應用多種檢驗方法可有效提高DCS設備盤柜裝配質量，能及時發現人因操作失誤產生的質量不良問題，并得以糾正處理，保證了安全級DCS設備盤柜裝配質量符合工程設計圖紙和相關法規標準要求。

關鍵詞：檢驗方法; 核級DCS; 裝配檢查; 質量特性；NCR；缺陷密度

Abstract: In the nuclear safety regulation HAF003, it is clearly pointed out that the safety level items of nuclear power plant "must be checked for every work step necessary to ensure the quality".If the processed items cannot be inspected or additional process monitoring is required, indirect control measures must be specified in the outline to ensure the long-term safe, reliable and stable operation of safety level items of nuclear power plant. This paper mainly describes the application of various inspection methods in the assembly inspection of safety grade DCS equipment cabinets in nuclear power plants. Through detailed study of the requirements of standard RCC-E “MC2000 visual inspection and mechanical inspection”and analysis of application characteristics of safety grade DCS equipment panel engineering design,combined with safety level DCS equipment cabinet assembly operation process, a variety of inspection methods have been clearly proposed: the application process of the smear marking method, the finger confirmation method, the torque verification method, the isolation verification method and the light source illumination verification in the assembly inspection of the safety level DCS equipment. These inspection methods have been applied in the assembly inspection of safety level DCS equipmentcabinets of several nuclear power plants. It has been proved that the application of multiple inspection methods can effectively improve the assembly quality of DCS equipment cabinets, timely detect the quality problems caused by human error, and be corrected and ensured that the assembly quality of the safety level DCS equipment cabinet assembly meets the design drawings and relevant regulatory standards.

Key words: Testing method; Nuclear safety level DCS;Assembly testing; Quality characteristics; NCR;Defect density

在線預覽：多種檢驗方法在核級DCS設備盤柜裝配檢查中的應用

摘自《自動化博覽》2019年11月刊